This product has been developed to emulate the look and feel of soft leather. The unique super dull finish is designed to be low burnishing, non-polishing and resistant to ultra violet exposure. Allante® vinyls have superb tailoring qualities, which make pre-heating and steaming unnecessary and not recommended in the fabrication process. Because of the special leather-like finish, additional precautions should be observed when processing and cleaning.
  • Auto / RV Seating and Trim
  • Hospitality
  • Marine Interiors
  • Conference Room and Executive Seating
  • Lounge Seating
  • Hotel/Motel Seating
  • Work Station Seating
  • Home and Residential Seating

  • Finished Width: 54 inches
  • Roll Size: 40 yards
  • Vinyl; Backing: 100% Polyester, Mellohide™
  • Weight: 29.25 +/- 2 oz per linear yard
  • Thickness: 45 +/- 5 mils
  • Abrasion resistance: No significant wear after 250,000 double rubs with #10 cotton duck using the Wyzenbeek test method
  • Cold Crack -25°
  • 1000 Hours WeatherOmeter
  • Mildew Resistant

  • FMVSS-302
  • CA TB 117-2013 (Section 1-Cover Fabric)
  • NFPA 260
  • UFAC Class 1
  • IMO MSC 88/26/ADD. 2 Part 8 (3.1 and 3.2)

This product has been developed to emulate the look and feel of soft leather. The unique super dull finish is designed to be low burnishing, non-polishing and resistant to ultra violet exposure. Allante® vinyls have superb tailoring qualities, which make pre-heating and steaming unnecessary and not recommended in the fabrication process. Because of the special leather-like finish, additional precautions should be observed when
processing and cleaning. Please avoid contact with marking inks, glues and other staining materials that may damage vinyl during the manufacturing process. Protecting seating with a clean polyethylene cover, as is common in the automotive industry, should enable you to deliver a stain free unit to the customer.

If despite all precautions, staining material does come in contact with Allante® vinyls, cleaning should be immediate and should follow these instructions:
• Dry soil, Dust and Dirt, Dried on Dirt: Remove with soft cloth
dampened with water.
• Variation in Surface Gloss: Wipe with a soft cloth dampened
with water. Allow to air dry.
• Stubborn Dirt: Wash with a soft cloth moistened with a mild soap
and water. Rinse with clean water.
• Stubborn Spots and Stains: Spray with either Formula 409®, or
Tannery Car Care Cleaner®, wiping with a soft cloth. Rinse with
clean water.
• Liquid Spills: Wipe immediately with a clean absorbent cloth.
Rinse with clean water.
• Food, Grease, and Oily Stains: Spray immediately using either
Formula 409®, or Tannery Car Care Cleaner®, wiping with a soft
cloth. Take care not to extend the area of contamination
beyond its original boundary. Rinse with clean water.

Allante® Vinyls should be periodically cleaned to maintain their appearance and prevent build-up of dirt and contaminates. Any stain, spill or soiling should be cleaned up promptly to prevent the possibility of permanent staining. When cleaning, always rub gently.

Caution: Powdered abrasives, abrasive cleaners, and steel wool damage vinyl, as do strong solvents, lacquer solvents and inks. Lotions, suntan oil, waxes and polishes, etc., contain oils and dyes that can cause stiffening and staining of vinyls. Never use heat guns or hair dryers.